Always Ensure Watercraft is Properly Secured on D.O.T. Approved Trailer During Application & Maintenance. For best results, apply in conditions between 60 - 90 F (16 - 32 C) 1. Clean and dry application area. 2. Prime application area with included alcohol wipes. 3. Remove Sticky Lure from backing by tail and apply nose first, facing the bow. Make sure pattern looks like a school of bait fish hiding beneath the boat. 4. From center to edge, rub Sticky Lures firmly with a damp lint free cloth, removing any air bubbles. 5. For maximum adhesion, allow 24 hours for Sticky Lures to set. Water conditions vary. Algae and other naturally occurring marine life may affect Sticky Lures visibility. If necessary, secure watercraft to trailer and clean affected areas with a soft cloth and mild soap. When storing watercraft avoid sunlight and extreme temperatures. Submit Your Story And Pictures Of Your Best Catch Using Sticky Lures Online At www.StickyLures.com Or Mail To Sticky Lures 1275 Tourmaline Ave Mentone, CA 92359-9809